On 10 November 2026, the Commission Pushed CRA Standardisation Deadlines Back a Third Month
In July 2026 we reported that the Commission had drafted a two-month extension to the 2026 deadlines for the CRA's harmonised standards, and that six weeks later it still was not adopted. It is adopted now. By Implementing Decision C(2026) 7861 final of 10 November 2026, signed by Executive Vice-President Henna Virkkunen, the Commission amended Annex I of its original standardisation request to CEN, CENELEC and ETSI, Implementing Decision C(2025)618 of 3 February 2025, known as mandate M/606. The new deadlines run a full month later than the draft we covered in July, and the decision landed in the same week CEN ratified and published the first two parts of the EN 40000 series.
What the decision actually changes
The Commission's own text explains the trigger: CEN, CENELEC and ETSI sent it a joint semestrial report on 3 June 2026 flagging developments affecting their timing, and after further exchanges the Commission decided to "slightly adjust the deadlines for 2026" in Annex I. According to the standardisation trackers CRAevidence and IBF Solutions, which have published the resulting dates, the horizontal vulnerability-management standards EN 40000-1-2 and EN 40000-1-3 now fall due 30 November 2026, and the product-specific Type C standards are now due 31 January 2027. Both move a month past the 31 October and 31 December 2026 dates in July's draft, on top of the two months already added to the original 30 August and 30 October 2026 targets, for three months of slippage in total. EN 40000-1-4, the generic security-requirements part, is unaffected and stays on track for 30 October 2027. These remain delivery deadlines to the Commission, not publication or citation dates.
The decision is not final by itself. Under its Article 2, if CEN, CENELEC or ETSI tell the Commission within a month of receipt that they reject the amendment, it lapses and the original February 2025 deadlines snap back into force. That objection window runs to roughly 10 December 2026.
The first EN 40000 parts landed, but won't help with conformity
In the same stretch, CEN closed the formal vote on EN 40000-1-1 (vocabulary) and EN 40000-1-2 (principles, risk management and lifecycle requirements) on 1 October 2026, ratified both on 2 November 2026, and published them as ENs on 18 November 2026. That sounds like the breakthrough the CRA standardisation effort has been waiting for, but per the CEN project records both are marked "no citation expected" under the CRA. Being published as European Standards does not put either one on a path to the Official Journal, so neither triggers the Article 27 presumption of conformity. The part that actually carries that weight, EN 40000-1-3 on vulnerability management, is the one now pushed to 30 November 2026.
Why the extra month matters
No CRA harmonised standard is yet cited in the Official Journal, for any product category, and that remains the fact that controls a manufacturer's options. Under Article 32(2), the lighter self-assessment route for Class I important products is only open where a cited harmonised standard, common specification or certification scheme covers the essential requirements; without one, a Class I product likely needs a notified body instead. Each month of slippage at the drafting stage is a month subtracted from the runway manufacturers have to test against finished text before the CRA's 11 December 2027 application date. Our classificatietool en CE marking and conformity guide show which route a given product faces regardless of when a standard lands, and the nalevingsmatrix keeps every duty tied to its article reference so none of them wait on a standard that has not arrived.
The 10 November 2026 extension is provisional until CEN, CENELEC and ETSI's one-month objection window closes, around 10 December 2026. No CRA harmonised standard is cited in the Official Journal yet. EN 40000-1-1 and EN 40000-1-2 are published but carry no citation prospect; EN 40000-1-3, the vulnerability-management standard that would matter for Article 27, is now due to the Commission by 30 November 2026, and the Type C product standards by 31 January 2027. We will revisit once the objection window closes or a standard is actually cited.
